Showing all 41 results

  • Land RoverSeries 1 86,88 & 107

    SKU: LR01

    £28.50 – £41.00

    As fitted to all the later SI vehicles long & short wheelbase (86,88 & 107 inch), soft & hard top. The plates were originally stamped with 3/16th inch number & letter punches and we can have the same done. Engraving is done on a CnC engraving machine. A blank plate is £28.50. P & P…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover Series II all models

    SKU: LR02

    £28.50 – £41.00

    SADLY WE ARE NOW OUT OF STOCK ON THE GOLD VERSION OF THIS PLATE AS THE SUPPLIER NEVER REOPENED AFTER THE FIRST COVID LOCKDOWN, WE ARE TRYING TO FIND ANOTHER SUPPLIER BUT FOR THE FORSEEABLE FUTURE WE CAN ONLY SUPPLY THE BLACK VERSION I have only ever seen the faded sand coloured genuine plates on…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • LRover SII (2) Chassis Bulkhead Plate Set All Models

    SKU: LR03

    £35.00 – £47.50

    A two plate set for the Bulkhead-Seatbox on all series II vehicles. I can supply the ID plate, plain, stamped or engraved, however you prefer them, the originals were all stamed with 3/16th inch (3mm) number punches. The ID plate is available ONLY in BLACK NOW AND FOR THE FORSEABLE FUTURE.. 

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover Series IIA Early 88 and 109

    SKU: LR04

    £28.50 – £41.00

    Sadly for the moment and forseable future we are out of stock on the Gold version of the 88″ plate being offered here. The supplier closed for the first Covid lockdown  and never reopened again, and is no longer contactable. The patterns for these plates were taken from two ex-militry S2A’s I had possession of for a…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover Series IIA 88 and 109

    SKU: LR05

    £28.50 – £41.00

    As fitted to all SIIA vehicles long & short wheelbase (109 & 88 inch), soft & hard top. CHOOSE YOUR VEHICLE TYPE FROM THE OPTIONS BOX BELOW The plates were originally stamped with 1/8th inch number & letter punches and we can have the same done. Engraving is done on a CnC engraving machine. A blank plate…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Series IIB 110 Forward Contrl

    SKU: LR06

    £28.50 – £41.00

      Out of stock at the moment maker closed down Taken from a rare non military vehicle with unknown history.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover Series III 88 Petrol and Diesel The Rover Co Ltd

    SKU: LR07

    £28.50 – £41.00

    As fitted to the early SIII before British Leyland started flexing there money muscles. Fitted to 71,72 and some (a few)73 registered vehicles.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Replacement 90-110-127-130 and Defender

    SKU: LR08

    £28.50 – £41.00

    These plates were also fitted to the SIII from late 1979 when the 17 digit chassis numbering system was introduced. FITTED TO THE LAND ROVER 90 & 110 BEFORE THEY WERE RENAMED THE DEFENDER 90/110. Have also seen this plate fitted to some of the early Range Rovers after the introduction of the 17 digit code…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Range Rover Classic Chassis ID The Rover Co Ltd

    SKU: LR09

    £28.50 – £41.00

    The original Range Rover ID plate showing the maker as The Rover Co Ltd. THESE PLATES CAN ONLY ACCEPT 10 DIGITS AT THE MOST, USED ON THE ORIGINAL RR PRIOR TO THE 17 DIGIT CHASSIS NUMBERING SYSTEM BEING INTRODUCED AND IMPLIMENTED in late 1978. Can be supplied PLAIN, STAMPED or ENGRAVED Plain.   £28.50 Stamped…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Range Rover Chassis ID Plate, Rover-British Leyland U.K. Ltd

    SKU: LR10

    £28.50 – £41.00

    Range Rover chassis ID plate showing the maker as Rover – British Leyland UK Ltd. Brought in by the new owners Leyland Cars and before the 17 digit chassis numbering system in 1978 We can supply then plain, stamped or engraved Plain. £28.50 Stamped £32 Engraved. £41

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Range Rover Chassis ID Plate, Rover-BL CARS

    SKU: LR11

    £28.50 – £41.00

    Range Rover chassis ID plate showing the maker as Rover – BL CARS. Brought into use by the new owners Leyland Cars and before the 17 digit chassis numbering system in 1978 We can supply then plain, stamped or engraved Plain. £28.50 Stamped £32 Engraved. £41 P & P for the UK will be £5 via…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover 90-110-127-130 Def & Disco VIN Plate

    SKU: LR12

    £30.00 – £42.50

    Normally fitted to the bonnet slam panel, these plates show the maker as Land Rover UK Ltd I have also seen them fitted to the top of the brake pedal servo mounting box Postage is £5 recorded within the UK and will need signing for. Can be supplied plain, stamped or engraved with the chassis number…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover Discovery/Range Rover VIN Plate

    SKU: LR13

    £30.00 – £42.50

    Normally fitted to the bonnet slam panel. These plates show the maker as Rover Group Ltd. I have also seen them fitted to the top of the foot brake servo mounting box Post and packing within the UK will be £5, recorded and need signing for. Can be supplied plain, Stamped or Engraved with the…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover SIII 109 Pet/Diesel The Rover Co Ltd

    SKU: LR14

    £28.50 – £41.00

    As fitted to the early SIII 71/ 72 and some  73 registered vehicles showing the Rover Co Ltd as the maker. As fitted to all vehicles prior to the 17 digit system being introduced in lated 1978 We can supply them Plain, Stamped  or Engraved Paln £28.50 Stamped  £32 Engraved  £41

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • L/Rover SIII 88 Petrol and Diesel showing Rover-British Leyland UK LTD as the makers

    SKU: LR15

    £28.50 – £41.00

    As fitted to the vehicles produced from mid 72 to late 79 when the 17 digit system was introduced by BL Showing the maker as Rover-British Leyland UK Ltd fitted to all vehicles prior to the 17 digit chassis numbering system being intrduced in late 1978 We can supply them Plain, Stamped or Engraved Plain…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • L/Rover SIII 88 Petrol and Diesel showing Rover-British Leyland UK as the makers

    SKU: LR16

    £28.50 – £41.00

    As fitted to the vehicles produced from mid 72 to late 79 when the 17 digit system was introduced by BL Showing the maker as Rover-British Leyland UK Ltd fitted to all vehicles prior to the 17 digit chassis numbering system being intrduced in late 1978 We can supply them Plain, Stamped or Engraved Plain…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • L/Rover SIII 109 Dies Rover-British Leyland UK LTD

    SKU: LR17

    £28.50 – £41.00

    As fitted to the vehicles produced from mid 72 to late 79 when the 17 digit system was introduced by BL Showing the maker as Rover-British Leyland UK Ltd fitted to all vehicles prior to the 17 digit chassis numbering system being intrduced in late 1978 We can supply them Plain, Stamped or Engraved Plain…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Small 4WD Tyre Warning Plate SI/SII and SIII

    SKU: LR18

    £8.00

    Fitted directly above or below the chassis plate on the bulkhead or seatbox on series 1 and 2.

    Add to cartDone

  • Windscreen VIN Tag

    SKU: LR19

    £30.00

    Polished alloy 12.5mm Windscreen/Bulkhead VIN tag embossed with your chassis number. Picture is an example of what it looks like, not the quality it will be in. All purchases will be a VIN tag in NEW condition.

    Add to cartDone

  • Land Rover Series 1 Recommended Lubricants Plate

    SKU: LR20

    £22.50

    As fitted to all series 1 & early S2 vehicles, usually on the bulkhead but have seen them in the engine bay and on the seat box.

    Add to cartDone

  • Land Rover Neg Earth, Welding Warning Plate

    SKU: LR21

    Fitted to most if not all military and civilian vehicles after the change from Positive earthg on the early vehicles and the standard fitting of alternators, both 12 and 24 volt vehicles. Can be seen fitted to seatbox, bulkhead, inner wings, radiator panel and bonnet slam panel.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • GENUINE L/Rover 90-110- Defender etc

    SKU: LR22

    £35.00 – £47.50

    Genuine L/Rover plate, I can supply these plain/stamped or engraved to you requirements. Postage for the UK is £5, please ask for a quote if you require postage outside the UK

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Personalised SIII-90-110-127-130-Defender-R Rover

    SKU: LR23

    £47.00

    These are GENUINE Land Rover Plates Correct for the 90/110/127 and DEFENDER AFTER SEPTEMBER 1978

    Add to cartDone

  • General Purpose NON Maker Chassis Plate

    SKU: LR24

    £12.00 – £24.50

    OUT OF STOCK AT THE MOMENT ON SOME OF THESE PLATES WHILE I FIND A NEW SUPPLIER FOR THESE NON MAKER PLATES I ONLY HAVE THE PLATE WITH VIN ON IT AT THE MOMENT.   Can be used on any and all types of vehicle, Car, Boat, Truck, Trailer, Motorcycle etc. Machines and Plant.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover 101 Forward Control

    SKU: LR25

    £28.50 – £41.00

    Out of stock at the mo due to maker not reopening after first covid lockdown   101 F/Control plate showing the maker as Rover-British Leyland U K Ltd Post and Packing within the UK will be £5 and RECORDED AND NEED SIGNING FOR. I can supply these plain, stamped or engraved.

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover 101 Forward Control

    SKU: LR26

    £28.50 – £41.00

    Made up from patterns supplied by 101 owners needing new or replacement VIN  ID plates. From the Rover-British Leyland UK Ltd era

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • L/Rover Series RARE Warning plate, Snowploughing

    SKU: LR27

    £15.00

    Out of stock at the moment   A rare Series warning plate fitted to vehicles built for North America, US and Canada. Warnes about tyre ware in 4WD, and when being towed. Also details how to drive when being driven as a snowplough. Post and packing for North America will be £5 via standard airmail

    Add to cartDone

  • Land Rover 24 volt NEGATIVE EARTH RED Warning plate

    SKU: LR28

    USED MAINLY ON THE 24v FFR vehicles and  5/10/20 ton trucks. 

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover FFR 24v NEGATIVE EARTH Black warning plate

    SKU: LR29

    FOUND MAINLY ON THE FFR COMMS TRUCKS

    Read moreDone

  • L/ROVER SII & SIIA EARLY TYPE PLATE

    SKU: LR30

    £28.50 – £32.00

    As of 11/9/23 these plates are out of stock    These can be supplied plain or stamped. All the originals, which are now faded to a sand colour were once this nice bright red. Postage for the UK is £5 recorded via Royal Mail, Rest of the world please add 1 Pound

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • L/Rover Series 1 Bulkhead ID (VIN) Plate

    SKU: LR31

    £32.00 – £35.50

    AS OF 11-9-23 THESE PLATES ARE OUT OF STOCK   These can be supplied plain or stamped. The originals were all RED, all have now faede to the sand colour or have no colour left to speak of. Postage within the UK is £5 via Royal Mail and recorded, please add 1 Pound for postage to…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Vintage Peugeot Chassis ID VIN Plate

    SKU: LR33

    £28.50 – £48.00

    This style of plate will be correct for many of the early Peugeot vehicles and vintage models too. Can be supplied plain, with chassis number only or fully engraved

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover 90-110 pre Defender Bulkhead VIN Plate

    SKU: LR34

    £25.00 – £37.50

    TEMPORARILY OUT OF STOCK, REORDERED AND AWAITING DELIVERY.   These were the original engine bay plates fitted to the first 90/110 vehicles, military and civilian, all models. The later 90/110 DEFENDER had a BL Cars or Land Rover UK Ltd plate. These show the maker as LEYLAND CARS Ltd I can supply these plain, stamped…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Genuine MOD Contract Plate

    SKU: LR40

    £35.00 – £60.00

    WE ARE AT THE MOMENT OUT OF STOCK ON THESE PLATES AS THE SUPPLIER HAS STOPPED TRADING AND NO LONGER CONTACTABLE.   I can supply these plain, as in photo, fully stamped or fully engraved with whatever contract and code numbers you require. Rover 1, 2 , 3 etc. Half, threequarter and one ton, GS (General…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Stage 1 V8 Military & Civi SIII-90-110-Lwt & Def

    SKU: LR41

    £22.50 – £35.00

    Out of stock at the moment as supplier closed due to covid and never reopened.   Also fitted to SIII, all models from late 79 after the introduction of the 17 digit chassis numbering system, plus Military Lightweights, FFR’s – GS, GP and Utility half, three quarter and one ton trucks. OUT OF STOCK AT THE MOMENT DUE TO…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Assorted Military

    SKU: LR42

    £22.50 – £31.00

    NO LONGER AVAILABLE AS THE SUPPLIER NEVER REOPENED AFTER THE FIRST COVID LOCKDOWN   These were the plates fitted usually on the firewall under the bonnet on all military Land Rovers supplied after 1979. Also fitted to the top of the brake pedal box on late SIII and 90H. They would also have one of…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • General Purpose Small MOD Contract Plate

    SKU: LR44

    £28.50 – £53.50

    WE ARE AT THE MOMENT OUT OF STOCK ON THESE PLATES AS THE SUPPLIER HAS STOPPED TRADING AND NO LONGER CONTACTABLE.   Available for Rover 1-2-3 etc, half, threequarter and 1 Ton GS, GP and Utility Truck, including FFR’s and Lightweights.  I can supply these plain, stamped or engraved. All the ones I have had or…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Land Rover Personalised ID Plate S1-S2-S2A-2B-A3

    SKU: LR45

    £47.50 – £60.00

    Available for S1-2-2A-2B-3 They can be engraved with whatever you require or desire, name, registration, type etc etc. Available in polished Half Hard Brass, Stainless Steel and clean Aluminium Once it is engraved the printer will add the correct ID plate and it can be stamped or engraved with a chassis number. Also now available…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • Speedo Head Converter

    SKU: LR46

    £4.99

    Very easy to fit as it is self adhesive like a tax disk holder.

    Add to cartDone

  • Series MOD Contract

    SKU: LR47

    £32.50 – £58.00

    WE ARE AT THE MOMENT OUT OF STOCK ON THESE PLATES AS THE SUPPLIER HAS STOPPED TRADING AND NO LONGER CONTACTABLE.   Available for Rover 1, 2 and 3 etc, etc, G S,  G P and Utility, 1/4, 1/2 , 3/4 and 1 Ton, including FFR’s and Lightweights These plates can be printed with whatever you…

    Select optionsDone This product has multiple variants. The options may be chosen on the product page

  • General Purpose Chassis ID plate, Vehicle or trailer

    SKU: LR49

    £10.00 – £22.00

    Idealy for trailers with mulitple axles and vehicles with trailers needing to display axle and train weights. Can be supplied PLAIN, STAMPED or ENGRAVED

    Select optionsDone This product has multiple variants. The options may be chosen on the product page