Welcome to the Shopping Cart for Chassis and VIN Plates

Left click an image for a larger view

 

 ALL ENGRAVING PRICES QUOTED ARE FOR THE CHASSIS NUMBER ONLY. IF YOU REQUIRE THE FULL PLATE ENGRAVING, WE CHARGE £25. 

 

All the plates can be stamped or engraved however you require them done

PLEASE BE AWARE THAT SHOULD YOU CHOOSE THE OPTION TO HAVE YOUR PLATE(S) NUMBERED UP, WE NEED THAT NUMBER.

 

PLEASE USE ONE OF THE FOLLOWING OPTIONS -

  • PUT IT IN THE 'MESSAGE TO SELLER' FIELD IF USING PAYPAL
  • USE THE 'CHASSIS-VIN TAG CONTACT FORM' ON THE MENU TO THE LEFT OF THE SITE
  • YOU CAN SEND IT IN AN EMAIL (WITH YOUR NAME) TO - landroverchassisplates@btconnect.com

PLEASE VISIT SEMA4RADIOS.COM FOR ALL YOUR RADIO NEEDS FOR FFR AND NON-FFR VEHICLES.

HF, VHF AND UHF SETS AVAILABLE WITH ALL ANCILLARIES AND FITTINGS REQUIRED.


 



Land RoverSeries 1 86 & 88

Plates can be supplied PLAIN, STAMPED OR ENGRAVED.

STAMPED  Plus  3.50

ENGRAVED  Plus  8.50

£28.50
(+ postage: £3.25)
Quantity: Options:


Land Rover Series II all models

I have only ever seen the faded sand coloured genuine plates on SII, I have as yet never seen a genuine Black version on a SII.

£28.50
(+ postage: £3.25)
Quantity: Options:


L\Rover SII (2) Chassis\Bulkhead Plare Set

A two plate set for the Bulkhead-Seatbox on all series II vehicles.

I can supply the ID plate, plain, stamped or engraved, however you prefer them, the originals were all stamed with 1/8th (3mm) number punches.

The ID plate is available in GOLD as pictured or BLACK as above. 

£32.50
(+ postage: £3.25)
Quantity: Options: Colour:


Land Rover Series IIA Early 88 and 109

The patterns for these plates were taken from two ex-militry S2A's I had possession of for a while. They were released from the MOD in 87 and 88. Both were 24v and both were FFR.

£28.50
(+ postage: £3.25)
Quantity: Options:


Land Rover Series IIA 88 and 109

Available for 88" and 109"

£28.50
(+ postage: £3.25)
Quantity: Options:


Series IIB 110 Forward Contrl

Taken from a rare non military vehicle with unknown history.

£28.50
(+ postage: £3.25)
Quantity: Options:


Land Rover Series III 88 Pet/Dies The Rover Co Ltd

As fitted to the early SIII before British Leyland started flexing there money muscles. Fitted to 71,72 and some (a few)73 registered vehicles.

Add  £3.50 for stamping or  £8.50 for engraving.

£28.50
(+ postage: £3.25)
Quantity: Options:


L/Rover SeriesIII 88 Rover-British Leyland U.K.Ltd

Fitted to vehicles produced in late 72 to late 79 when the 17 digit VIN coding system was introduced.

Add  £3.50 for stamping or  £8.50 for engraving

£28.50
(+ postage: £3.25)
Quantity: Options:


Replacement 90-110-127-130 and Defender

These 2 plates were also fitted to the SIII from late 1979 when the 17 digit chassis numbering system was introduced.

£28.50
(+ postage: £3.25)
Quantity: Options:


Stage 1 V8 Military & Civi SIII-90-110-Lwt & Def

Also fitted to SIII, all models from late 79 after the introduction of the 17 digit chassis numbering system, plus Military Lightweights, FFR's - GS, GP and Utility half, threequarter and one ton trucks

£22.50
(+ postage: £3.25)
Quantity: Options:


Personalised SIII-90-110-127-130-Defender-R Rover

These are GENUINE Land Rover Plates Correct for the 90/110/127 and DEFENDER

£47.00
(+ postage: £3.25)
Quantity:


Assorted Military

These were the plates fitted usually on the firewall under the bonnet on all military Land Rovers supplied after 1979. Also fitted to the top of the brake pedal box on late SIII and 90H. They would also have one of the MOD contract plates fitted within the cockpit area.

These can be supplied PLAIN, STAMPED OR ENGRAVED.

Add 3.50 for Stamping and 6.50 for Engraving

£22.50
(+ postage: £3.25)
Quantity: Options:


Genuine MOD Contract Plate

I can supply these plain, as in photo, fully stamped or fully engraved with whatever contract and code numbers you require.

Rover 1, 2 , 3 etc. Half, threequarter and one ton, GS (General Service) GP (General Purpose) or Utility Truck. FFR 1/2 ton 4 x 4 Rover Series 3 Airportable. (Lightweights)

£35.00
(+ postage: £3.25)
Quantity: Options:


Series MOD Contract

Available for Rover 1, 2 and 3 etc, etc, G S,  G P and Utility, 1/4, 1/2 , 3/4 and 1 Ton, including FFR's and Lightweights

Thes plates came be printed with whatever you require on them, Con No, CES No, CODE NO etc. They can also be supplied with the chassis and military registration number stamped in.

£32.50
(+ postage: £3.25)
Quantity: Options:


General Purpose NON Maker Chassis Plate

Can be used on any and all types of vehicle, Car, Boat, Truck, Trailer, Motorcycle etc. Machines and Plant.

£12.00
(+ postage: £3.25)
Quantity: Options:


Land Rover Large 4WD Warning Plate

As fitted to military and civilian SIII onwards after 1972

£12.50
(+ postage: £3.25)
Quantity:


Small 4WD Tyre Warning Plate SI and SII

Fitted directly above or below the chassis plate on the bulkhead or seatbox on series 1 and 2.

£5.00
(+ postage: £3.25)
Quantity:


Speedo Head Converter

Very easy to fit as it is self adhesive like  a tax disk holder.

£4.99
(+ postage: £3.25)
Quantity:


General Purpose Small MOD Contract Plate

Available for Rover 1-2-3 etc, half, threequarter and 1 Ton GS, GP and Utility Truck, including FFR's and Lightweights.  I can supply these plain, stamped or engraved. All the ones I have had or seen have been heavily stamped with letter and number punches.

£28.50
(+ postage: £3.25)
Quantity: Options:


Land Rover Personalised ID Plate S1-S2-S2A-2B-A3

Available for S1-2-2A-2B-3 They can be engraved with whatever you require or desire, name, registration, type etc etc.

Available in polished Half Hard Brass, Stainless Steel and clean Aluminium

Once it is engraved the printer will add the correct ID plate and it can be stamped or engraved with a chassis number. Also now available for the 90-110 and Defender, plus the BL Cars Ltd Stage 1 V8

£47.50
(+ postage: £3.25)
Quantity: Options:


Range Rover Classic Chassis ID The Rover Co Ltd

The original Range Rover ID plate showing the maker as The Rover Co Ltd.

Can be supplied PLAIN, STAMPED or ENGRAVED

£28.52
(+ postage: £3.25)
Quantity: Options:


Range Rover Chassis ID Plate, Rover BL

Range Rover chassis ID plate showing the maker as Rover - British Leyland UK Ltd.

£28.50
(+ postage: £3.25)
Quantity: Options:


General Purpose Chassis ID plate, Vehicle or trail

Idealy for trailers with mulitple axles and vehicles with trailers needing to display axle and train weights.

Can be supplied PLAIN, STAMPED or ENGRAVED

£10.00
(+ postage: £3.25)
Quantity: Options:


Land Rover 90-110-127-130 Def & Disco VIN Plate

Normally fitted to the bonnet slam panel, these plates show the maker as Land Rover UK Ltd

Postage is £3.25 recorded within the UK and will need signing for.

Can be supplied plain, stamped or engraved with the chassis number

.

£30.00
(+ postage: £3.25)
Quantity: Options:


Land Rover Discovery/Range Rover VIN Plate

Normally fitted to the bonnet slam panel. These plates show the maker as Rover Group Ltd.

Post and packing within the UK will be £3.25, recorded and need signing for.

Can be supplied plain, Stamped or engraved with the chassis number.

£30.00
(+ postage: £3.25)
Quantity: Options:


Land Rover 101 Forward Control

101 F/Control plate showing the maker as Rover-British Leyland U K Ltd

Post and Packing within the UK will be £3.25 and RECORDED AND NEED SIGNING FOR.

I can supply these plain, stamped or engraved.

£28.50
(+ postage: £3.25)
Quantity: Options:


Land Rover 101 Forward Control

Made up from patterns supplied by 101 owners needing new or replacement VIN  ID plates.

From the Rover-British Leyland UK Ltd era

£28.50
(+ postage: £3.25)
Quantity: Options:


L/Rover Series RARE Warning plate, Snowploughing

A rare Series warning plate fitted to vehicles built for North America, US and Canada.

Warnes about tyre ware in 4WD, and when being towed. Also details how to drive when being driven as a snowplough.

Post and packing for North America will be £3.25 via standard airmail

£25.00
(+ postage: £3.25)
Quantity:


Land Rover SIII 109 Pet/Diesel The Rover Co Ltd

As fitted to the early SIII 71/ 72 and some  73 registered vehicles

£28.50
(+ postage: £3.25)
Quantity: Options:


L/Rover SIII 109 Pet/Dies Rover-British Leyland UK

As fitted to the vehicles produced from mid 72 to late 79 when the 17 digit system was introduced by BL

£28.50
(+ postage: £3.25)
Options:


L/Rover Series 2 & 2A Bulkhead ID Plates

These can be supplied plain or stamped.

All the originals, which are now faded to a sand colour were once this nice bright red.

Postage for the UK is £3.25 recorded via Royal Mail, Rest of the world please add 1 Pound

£28.50
(+ postage: £3.25)
Quantity: Options:


L/Rover Series 1 Bulkhead ID (VIN) Plate

These can be supplied plain or stamped.

The originals were all RED, all have now faede to the sand colour or have no colour left to speak of.

Postage within the UK is £3.25 via Royal Mail and recorded, please add 1 Pound for postage to the rest of the world

£28.50
(+ postage: £3.25)
Options:


GENUINE L/Rover 90-110- Defender etc

Genuine L/Rover plate, I can supply these plain/stamped or engraved to you requirements.

Postage for the UK is £3.25, please ask for a quote if you require postage outside the UK

£35.00
(+ postage: £3.25)
Quantity: Options:


Vintage Peugeot Chassis ID VIN Plate

This style of plate will be correct for many of the early Peugeot vehicles and vintage models too.

Can be supplied plain, with chassis number only or fully engraved

£28.50
(+ postage: £3.25)
Quantity: Options:


Land Rover 90-110 pre Defender Bulkhead VIN Plate

These were the original engine bay plates fitted to the first 90/110 vehicles, military and civilian, all models. The later 90/110 DEFENDER had a BL Cars or Land Rover UK Ltd plate. These show the maker as LEYLAND CARS Ltd

I can supply these plain, stamped or engraved.

£25.00
(+ postage: £3.25)
Quantity: Options:


Land Rover Neg Earth, Welding Warning Plate

Fitted to most if not all military and civilian vehicles after the change from Positive earthg on the early vehicles and the standard fitting of alternators, both 12 and 24 volt vehicles.

Can be seen fitted to seatbox, bulkhead, inner wings, radiator panel and bonnet slam panel.

£10.00
(+ postage: £3.25)
Quantity:


Land Rover Series 1 Recommended Lubricants Plate

As fitted to all series 1 & early S2 vehicles, usually on the bulkhead but have seen them in the engine bay and on the seat box.

£22.50
(+ postage: £3.25)
Quantity:


Windscreen VIN Tag

Polished alloy 12.5mm Windscreen/Bulkhead VIN tag embossed with your chassis number.

Picture is an example of what it looks like, not the quality it will be in. All purchases will be a VIN tag in NEW condition.

£30
(+ postage: £3.50)
Quantity:

test 
£0.01

Make payments with PayPal - it's fast, free and secure!